# Users

The **Users** tab lists everyone in your organization: active members, pending invitations and
disabled members. From here you invite people, choose their role and which workspaces they can
use, and disable members who leave.

<Availability permission="Owners and Admins. Transferring ownership: the Owner only." />

## Key concepts

**Owner.** Every organization has exactly one owner. Nobody else can be made owner, except
through [transferring ownership](#to-transfer-ownership). The owner can't be disabled.

**Status.**

| Status | Means |
| --- | --- |
| **Active** | A member who can sign in. |
| **Invited** | An invitation was sent and hasn't been accepted yet. The row reads **Waiting to accept the invitation**. |
| **Deactivated** | A disabled member. They can't sign in, and their row stays in the list, grayed out. An invitation that was revoked, or that the person declined, is deactivated too, and its row reads **Invitation not accepted**. |

**Workspace access.** Owners and Admins get every workspace: the ones that exist when they join or
become an Admin, and every workspace created later. Every other member uses only the workspaces you
give them, here or on a workspace's own **Permissions** tab. See
[Organizations and workspaces](/user-guide/get-started/organizations-and-workspaces#key-concepts).

**Workspace admin.** A member made an admin of one workspace on its **Permissions** tab, in
[Workspace settings](/user-guide/settings/workspace-settings/workspace). They manage that
workspace, including who can open it, without being an **Owner** or **Admin** of your
organization. The **Users** tab doesn't show who is a workspace admin: the workspace's
**Permissions** tab does.

## The Users tab at a glance

In the sidebar, choose **Identity & Access**, then **Users**, the first tab under **Overview**, in
the **People** group.

<Screenshot id="iam-users" alt="The Users tab: a table of members with their name and email, role, workspaces and status, each with an on/off switch" />

**The toolbar** holds:
- **Invite user** (the **+**);
- the search box, which matches names and emails;
- the filter and sort controls.

If your plan limits the number of people, a counter such as **8 / 10** under the toolbar, at the
right, shows how many seats are taken out of your plan's limit. It turns red once 90% of the
seats are taken. It's the same limit that stops an invitation when every seat is taken. With no
limit on your plan, there is no counter.

On a per-user plan, **Billed members** beside it shows how many members you are billed for: your
active members only. If you pay by card or SEPA Direct Debit, right after a change it can also
say that your subscription is moving to the new count, which happens within a few minutes. If you
pay by invoice, it can say how many members your last invoice counted instead: the change counts from your
next invoice. See [Member limit and billed members](#member-limit-and-billed-members).

**Filters** narrow the list by **Role**, **Status** (**Active**, **Invited**, **Deactivated**) and
**Multi-factor** (**Set up**, **Not set up**). **Sort** orders it by **Name**, **Role**, **Status**
or **Multi-factor**.

**The list** has a column for each of these:
- **Member**: their name and email, and **You** on your own row;
- **Role**: the member's role;
- **Workspaces**: the workspaces they can use, or **All workspaces**;
- **Multi-factor**: **Set up** or **Not set up**, for whether they have set up multi-factor
  authentication. It's empty for an invitation that hasn't been accepted yet;
- **Status**: **Active**, **Invited**, **Deactivated** or **Not accepted**, with a switch that
  disables or enables them.

Each row ends with **User actions** (the **⋮** menu). Your own row and the owner's row have no
switch and no actions.

## Inviting people

<Screenshot id="iam-invite" alt="The Invite Member dialog, with the Email and Role fields and the Workspace access checklist" />

### To invite a member

1. In the sidebar, choose **Identity & Access**, then **Users**, then **Invite user** (the **+**).
2. Enter the person's **Email**. You invite one person at a time.
3. Choose their **Role**. It starts on **Power User**, and every role except **Owner** is
   available. On a per-user plan, the dialog reminds you when the person is billed: from when they
   accept, pro rata for the rest of the billing period, or, if you pay by invoice, on your next
   invoice, from the day they accept. It also says what each member costs per month or per year
   on your billing cycle, excluding VAT, and in the Netherlands including VAT too. Nothing is
   charged until they accept.
4. Under **Workspace access**, select the workspaces they can use. The workspace you're in is
   already selected. An **Admin** gets every workspace, so the list isn't shown.
5. Choose **Send Invitation**.

The person appears in the list as **Invited**, and they get an email with a link to join. The
link works for 7 days. Someone without an account creates one from the link. Someone who already
has one chooses **Accept invitation**, or accepts it from their profile, under **Pending
invitations**, without the email. See
[Signing up and signing in](/user-guide/get-started/sign-up-and-sign-in#to-join-your-teams-organization).

If the email can't be sent, Productmind says so: the invitation is still created and keeps its seat,
and you can choose **Resend invitation** to try the email again.

### To resend or revoke an invitation

1. On the invited member's row, choose **User actions** (**⋮**).
2. Choose **Resend invitation** to send a new email with a fresh 7-day link, or **Revoke
   invitation** and confirm to cancel it.

Productmind confirms that the email was sent, or says that it couldn't be sent, in which case try
again in a few minutes. Either way, the link in an earlier email stops working.

:::note
An invitation that has expired still takes a seat, and the address can't be invited again,
until you resend or revoke it.
:::

## Managing members

### To change a member's role

1. On the member's row, choose **User actions** (**⋮**), then **Change role**. You can also
   choose their role in the **Role** column.
2. Choose the new role.

The change takes effect right away. You can change the role of active and invited members, but
not the owner's or your own.

### To change which workspaces a member can use

1. On the member's row, choose their workspaces.
2. Under **Access to workspaces**, select or clear workspaces. **Select all** gives every
   workspace.

Each change is saved as you make it. A member who is an admin of a workspace stays one while that
workspace stays selected. The same access can also be changed one workspace at a time, on that
workspace's **Permissions** tab in
[Workspace settings](/user-guide/settings/workspace-settings/workspace#permissions), where its
owner and its admins can change it too.

### To disable a member

1. On the member's row, turn off the switch, or choose **User actions** (**⋮**), then
   **Disable user**.
2. Choose **Disable**.

The member can no longer sign in. They lose access to every workspace and are removed from
their teams. Productmind has no separate "delete member": disabling is how you remove someone. On
a per-user plan, the confirmation also says that their seat stops being billed, and how your
payment provider handles it.

### To enable a member again

1. On the disabled member's row, turn on the switch, or choose **User actions** (**⋮**), then
   **Enable user**.
2. On a per-user plan, Productmind asks first, because the member is billed again. Choose
   **Enable**.

The member can sign in again and takes a seat again. Owners and Admins get every workspace back.
Other members get **no** workspaces back: give them their workspaces again, and add them back to
their teams.

A row that reads **Invitation not accepted** has no switch: nobody joined through that invitation,
so it can't be enabled. [Invite](#to-invite-a-member) the person again instead.

### To transfer ownership

Only the owner can do this.

1. On the new owner's row, choose **User actions** (**⋮**), then **Transfer ownership**.
2. Choose **Transfer ownership**.

The member becomes the owner, and you become an **Admin**. The new owner must be an active
member.

## How members behave

**Seats.** Active and invited members each take a seat. Inviting someone, or enabling a disabled
member, fails when every seat is taken: "You have reached your user limit". Upgrade your plan or
free a seat by revoking an invitation or disabling a member. See
[Plan](/user-guide/settings/billing-and-payments/subscription-plan) and
[Plans and limits](/user-guide/reference/plans-and-limits#reaching-a-limit).

### Member limit and billed members

Your plan's member limit and what a per-user plan bills count different people:

| | Member limit (the counter) | Billed members (per-user plans) |
| --- | --- | --- |
| Active members | Counted | Billed |
| Pending invitations | Counted | Not billed |
| Disabled members | Not counted | Not billed |

So inviting someone takes a seat under the limit straight away, and adds to the bill only once
they accept. Enabling a disabled member adds to the bill, and disabling one takes them off it.
If you pay by card or SEPA Direct Debit, Productmind updates your subscription a few minutes after
members change. If you pay by invoice, members are counted when each invoice is drafted. How each
change is charged depends on how you pay: see
[How a per-user plan is billed](/user-guide/settings/billing-and-payments/subscription-plan#how-a-per-user-plan-is-billed).

**Single sign-on.** If your organization
[requires single sign-on](/user-guide/settings/identity-and-access/single-sign-on), members
sign in through your identity provider rather than with a password or Google. The owner can
still use a password. Someone who doesn't have a Productmind account yet, invited at an address on
one of your domains, can join by signing in through your identity provider, with the role and
workspaces in the invitation. Everyone else accepts the invitation from its email first, then
signs in with single sign-on.

**The invitation email** names only whether the person joins as an admin or a member. Their
actual role is the one you chose.

## Permissions

| To | You need |
| --- | --- |
| See the Users tab | The **Owner** or **Admin** role |
| Invite members, resend and revoke invitations, change workspace access, disable and enable members | The **Owner** or **Admin** role |
| Change a member's role | The **Owner** or **Admin** role |
| Transfer ownership | The **Owner** role |

## Troubleshooting

### "An invitation is already pending for this email"

The person already has an invitation, which may have expired. Resend or revoke it from their row.

### "User is already a member of this organization"

They're already in the list. If they're disabled, enable them instead.

### "They never accepted the invitation. Invite them again."

The invitation was revoked, or the person declined it, so there is no member to enable.
[Invite](#to-invite-a-member) them again, which sends them a new invitation.

### The invitation email didn't arrive

Choose **Resend invitation** on their row. If the person already has a Productmind account, they
don't need the email: they can accept the invitation from their profile, under **Pending
invitations**.

### "You have reached your user limit"

Every seat is taken. Revoke unused invitations, disable members who have left, or upgrade your
plan.

### A member who was enabled again can't see anything

Enabling a member gives Owners and Admins every workspace, but gives other roles none. Choose the
member's workspaces and select the ones they need.

## Related topics

- [Workspace settings](/user-guide/settings/workspace-settings/workspace)
- [Teams](/user-guide/settings/identity-and-access/teams)
- [Roles](/user-guide/settings/identity-and-access/roles)
- [Single sign-on](/user-guide/settings/identity-and-access/single-sign-on)
- [Multi-factor](/user-guide/settings/identity-and-access/multi-factor)
